How To Draw Blood Cultures With Syringe. Collect blood for culture through the hub. Flush the line with saline.
After blood is drawn into the syringe, the needle is withdrawn from the patient’s The process of drawing blood using a traditional syringe and needle. Do not allow air to enter bottle.
Remove Transfer Device From Blood Culture Bottle And Discard With Syringe Into Sharps Container.
If collecting from an adult or adolescent, the aerobic bottle (blue top) must always be inoculated first to avoid the release of air from the syringe into the anaerobic bottle. Any order for blood cultures should consist of a minimum of 2 complete sets of cultures. Do not allow air to enter bottle.
Invert Bottle Once Or Twice.
When using a straight needle, not until you apply the tube, will you see the flash of blood. While wearing gloves, attach syringe or blood culture adapter cap to hub. After blood is drawn into the syringe, the needle is withdrawn from the patient’s
Remove The Adapter Cap And Inject 10 Ml Of Blood Into Each Bottle.
Inject 10 ml of blood though rubber top of each blood culture bottle. Do not recap the needles. Attach the needed tubes or syringes to remove the proper volume of blood.
Indicate Central Line Draw (By Color For.
Label each bottle with an acceptable patient label being careful not to cover the bar code on bottle. Attach separate sterile transfer device to the first collected syringe and inoculate aerobic bottle with 10 ml of blood. Connect the infusion or flush injection cap with heparin and place a new.
Collect Blood For Culture Through The Hub.
Tighter the skin, less painful the puncture will be. Do not change the needle on the syringe prior to inoculating bottles. Alcohol is preferable to povidone iodine, because blood contaminated with povidone iodine may falsely increase levels of potassium, phosphorus or uric acid in laboratory test results ( 6 , 7 ).