close
close

How To Relight A Pilot Light On A Gas Fireplace References

How To Relight A Pilot Light On A Gas Fireplace References. Pilot light to gas fireplace won’t stay lit. Gas fireplaces have traditionally used a standing pilot light to ignite the flames.

Gas Fireplace Pilot Light On Or Off Lighting Ideas
Gas Fireplace Pilot Light On Or Off Lighting Ideas from decorlighting.port-media.org

Turn the gas regulator valve to the “pilot” position. If your old gas furnace has a standing pilot, you can follow a standard procedure to relight the pilot light. If the pilot light does not engage on the first try, you may have to hold down the knob long enough to purge the air out of the gas line.

It Is Located Near The Gas Burners And Will Usually Have A Gas Cock Or Valve Knob That Reads On, Pilot, And Off.keep The Knob In For 20 Seconds And Then Release It And Turn It To The On Position.keep This Button Depressed Until The Pilot Flame Burns Brightly.

The most important point here is that it is important to determine the cause if the pilot light on your gas fireplace does go out. First, turn your gas fireplace’s knob from the “off” to the “pilot” position. Often, this will involve manually depressing the pilot valve and using an electric ignitor or match to light the pilot.once the pilot is lit, hold the pilot valve in for 60 seconds.once you have given any excess gas a chance to dissipate, follow the instructions in your system’s manual to relight the pilot.

Newer Generations Of Gas Fireplaces Use An Electronic Ignition System, Requiring.

Because that system does not use external electricity, the fireplace works if the power goes out. When the fireplace or propane heater is turned on, the pilot light serves as an ignition source for the larger sweep of gas released from the burner. Most gas fireplaces have a standing pilot light, which is a small flame that burns even when you aren't using the fireplace.

In Many Cases, You Can Always Follow The Manufacturer’s Instructions And Relight Your Pilot Light Accordingly.

Read and follow the instructions that came with you. If it doesn’t have the button, or the button fails, press the regulator valve and hold a grill lighter or long match to the pilot light valve until the pilot ignites. To relight the pilot, turn the oven control knob to the “off” position and remove the oven’s broiler carriage.turn off the gas and ventilate the kitchen, then turn the gas back on and relight the pilot.turn the breaker to the off position.

Click To See Full Answer.

The gas ought to ignite. Pull the match or light away when the burner lights. This process may take several minutes and several.

If The Oven Is Designed To Be Manually Lit For Every Use, Flip The Temperature Dial On Slowly.

Turn the gas key to release gas to the burner. How to relight pilot light on gas fireplace? This fireplace has a pilot which must be lit manually.

Tags :

Leave a Reply

Your email address will not be published.